The VersaT8 is our premier LED tube and works with most T8 electronic ballasts. The advantage to this tube is its versatility. Not only can this tube work with a ballast, it can also work without a ballast, directly wired into AC100-277V. The power consumption of these LED lights range from 12-20W from 3000K to 5000K. These eco-friendly bulbs have a lifespan up to 50,000 hours or more and can save you up to 60% in power consumption. These are the highest quality products on the market today - they are ETL and DLC 5.1 Listed and come with a 5 year warranty!
These tubes come with safety thermal fuses and use dot dimming.
Our led tubes bypass retrofit T8/T12 32w and 40w fluorescent tubes. Our led tubes plug and play feature work with most T8 rapid start and instant start ballasts.
Preparing For Installation
1. Check the ballast installed in the field and make sure the ballast is in manufacturer’s ballast list which can be found below. If the ballast out of the manufacturer’s ballast list, a test may be needed before any mass installation. 2. Loose and damaged lamp holder and socket need to be adjusted or be replaced.
*For Plug N' Play installation, check the ballast compatibility list to ensure optimal and safest utilization of the tube light.
Great experience, fast shipping, will be ordering again. One end of the shop has been converted to your LED 5000K lights, in the process of switching to your LED lights in the main section of the building - you can see the difference next to old fluorescent bulbs.
Fantastic! I had to check 3 different sources because I didn't believe how easy it was to retrofit. Double the light and no hum. Can't wait to see the savings. Will be ordering another 50.
The LED tube lights are great. I converted three 4 tube fixtures in the basement. And converted these four 2 tube fixtures for my sons garage. They give off plenty of light and the price is a value.
These bulbs are brighter, warmer, and more satisfying than the 40W fluorescent bulbs I replaced. Bypassing the ballasts was more work than I expected but after 5 or 6 of them, it became very easy.
Updated lighting at church went from a 4100k fluorescent 32 watt tubes to the 18 Watt 5,000 k LED tubes. Lighting went from an off color yellowish light to a nice bright crisp clear whiter light.
When we received the bulbs, 7 of the 25 were broken to pieces. We contacted the company & in a matter of a few days & couple correspondences, we had replacement bulbs sent to us!! No flickering, great bulbs for great price. Will order more!!
I bought 4 pack of 25 boxes. One was broken during shipment. HDL gave me " no hassel" refund or credit on my next purchase. I decided to order more and recieved the credit.
The first light panel in the picture shows how much brighter the new LED tubes are versus the old Phillips in the other two panels. The best part is that they use half the wattage than the old tubes. Great product! 👍
One of our most important customers, a manager of a fleet of ocean going ships, came to us for a fluorescent to LED conversion solution aboard their ships where large voltage fluctuations and vibration were a major concern. They had tried other brands of LED tubes with no success. The Greentek Versa tubes have proven to be extremely versatile and reliable in rough environments. Thus far, they are the only LED conversion tube that we have found that will hold up in this tough environment with such ease of installation and no fixture modification required. The light quality of the frosted Versa tubes is exceptional - the attached pictures show a before and after Greentek Versa tube installation. Before the lights created stripes on the floor and were a safety concern, the frosted Versa tubes create a bright even distribution.
Received the tubes today and were installed with ease. Happy to report that there were tube clips in the box.Good Touch. Packaging was good with a Fragile sticker on the box. Overall experience was great and recommend Geen Light Depot for my future needs. The lights that I purchased have a 5 year warranty. Thank you.
We used these to replace 14 fluorescent tubes in our wood shop after the ballasts started dying in those. Removing the ballasts is not a big deal if you can strip wires, and these lights are brighter and have better color than our old fluorescent tubes. Now plan on doing some in the garage/ metal shop.
Like that they can work with or without ballast. Easy to rewire after removing ballast. Customers are amazed at how much light they give off compared to fluorescent bulbs. Have purchased several cases and just got another to have on hand.